• WI-127
| |
•
Legal for trade, Class III MIL
10,000d
• Stainless steel NEMA 4X enclosure
• Bright, easy-to-read, .8 inch
LED display
• Numeric keypad
• Three programmable units of measure
• Three setpoint outputs, options
for up to ten
• Seven logic level inputs
• Built-in serial port
• Ten tare memory
• Built-in time and date, battery
protected
• Harmonizer™ filtering software
• Front panel configuration
• Sixty times per second A to D
conversion
• Display rate - Ten times per
second
• Five point linearization
• Battery backed-up RAM
• Options for system expansion
Specifications |
| |
— |
Power requirements:
115 Volts AC, +10% to -15% @ 0.3Amp maximum 230 Volts AC, +10% to -15% @ 0.15
Amp maximum 50/60 Hz |
| |
— |
Excitation: 10 Volts DC
Supports up to twelve 350-ohm weight sensors |
| |
— |
Operational keys:
Five yellow standard keys: Zero, Tare, Print, Units, Select Three function keys:
F1, F2, F3 Numeric keys: 0-9 |
| |
— |
Operational annunciators:
Gross, Tare, Net, Print, Zero, Motion Under, Accept, Over, Cutoff, ID, Three
units of measure |
| |
— |
Display: Eight-digit, seven-segment,
0. 8-inch high LED |
| |
— |
Display rate: Selectable (1,
2, 5, 10)
Analog to digital conversion rate: 60 times per second |
| |
— |
Capacity selections:
999,999 with decimal located from zero to five places |
| |
— |
Incremental selections:
Multiples and sub-multiples of 1, 2, 5 |
| |
— |
Unit of measure:
Three, independently programmable:
Pounds, kilograms, grams, ounces, ton, tonne, custom. |
| |
— |
Programmable selections: Zero
range, motion detection, automatic
zero tracking, five-point linearization. |
| |
— |
Time and date/RAM:
Battery backed up real time clock and RAM are standard |
| |
— |
Internal resolution: 6,291,456
counts per mV/V per sec. |
| |
— |
Harmonizer™ digital filtering:
Fully programmable to ignore noise and vibration |
| |
— |
Standard inputs:
Seven configurable logic level inputs for functions such as tare, print, zero,
units, etc. |
| |
— |
Standard outputs:
Three cutoff outputs, open collector design Relay power supply, 24 VDC at 150mA
5 VDC at 200 mA for scanner power source Bidirectional serial port (RS-232
or
RS-422/485 or 20mA current loop) |
| |
— |
Serial Command Inputs:
Programmable serial response to ASCII character input |
| |
— |
Self diagnostics:
Display, keys, inputs, outputs, serial port, A to D converter, voltages |
| |
— |
Circuitry protection: RFI, EMI,
and ESD protection |
| |
— |
Options:
Two additional serial ports BCD parallel 16 outputs & 8 inputs Analog output
0-5, 0-10 volts
1-5, 4-20, 10-50 mA |
| |
— |
Operating temperature:
-40 to 140° F (-40 to 60° C)
100% relative humidity including washdown
Enclosure: NEMA 4X stainless steel enclosure |
| |
— |
Dimensions:
12" W x 8" H x 4" D (without mounting bracket) 12.3" W x
11.0" H x 5.3" D (with mounting bracket
Weight: 12.5 lb, 5.7 kg |
| |
— |
Agencies:
NTEP Class III/IIIL10,000 divisions
Certificate of Conformance #96-140.A1 Canadian Weights and Measures #AM-5167
FCC Class A CSA, CUL, UL |
|
 |
