| |
The
Weigh-Tronix WI-125 Batch Controller
for batching and filling applications.
The wall mounted NEMA 4 enclosure
is available in either painted
carbon steel or stainless steel.
The unit is easily configured for.
2 speed single ingredient filling,
e.g., big bag filling
1 speed single ingredient filling,
e.g., mixing/blending of 2 products.
Start/Stop interlock, prevents
accidental restart once sequence
is completed.
Emergency Stop, large red mushroom
switch provides quick operator
access in the event of a problem
e.g., burst containers.
Batching lamp illuminates during
the filling operation, informing
the operator of the status.
Auto-Tare on start up configured
to allow net weight filling. (Empty
container is tared)
Minimum weight configuration can
be configured to prevent start
up, unless above a minimum weight
(when third cutoff is available).
Jog facility: allows the operator
to top-off fill manually in the
event of an underfill or desired
increase.
RS-232 / RS-485 serial port for
connection with a printer or computer.
Date and time documentation for
use with printer or computer to
form part of a quality control
system.
Specifications |
| |
— |
Power requirements:
115 Volts AC, 230 Volts AC, 50/60
Hz |
| |
— |
Excitation: 10 VDC |
| |
— |
Operational annunciators:
Batching lamp on enclosure with gross, net, center of zero, print, Ib and kg
on indicator |
| |
— |
Display: Eight-digit, 0.6-inch
high LED |
| |
— |
Display rate: Configurable to
1, 2 or 5 times per second |
| |
— |
Display averaging: One to ten
display periods. A to D conversion
rate: 60 times per second |
| |
— |
Internal resolution:
884,736 counts at 3 mV/V per sec. 294,912counts at 1 mVA/per sec. |
| |
— |
Increments:
0.0001 to 20,000 programmable to any division size between these limits. |
| |
— |
Output relay contacts rated:
10 A resistive load at 12.0/240 VAC 10 A load at 30 VDC 7.5 A inductive load
at 120V AC 7 A inductive load at 240 V AC |
| |
— |
Loadcells:
Drives up to 4- 350 ohm Weigh Bars or loadcells |
| |
— |
Controls:
Start, Stop, Jog on enclosure Gross/Net, Tare, Zero, Print, Units, Menu Keypad
(0-9) on indicator |
| |
— |
Operating temperature:
14 to 104° F (-10 to 40° C) 10 to 90% relative humidity |
| |
— |
Dimensions:
11" W x 13.5" H x 5. 4" D (Carbon Steel) 11" W x 13.5" H
x 6.4" D (Stainless Steel) |
| |
— |
Weight: 29 lb
(13 kg) |
| |
— |
Agencies:
NTEP Certificate of Conformance #92-167A4
Warranty: 2 year limited warranty applies |
